Reason RE Lab One Recordings Battle-Axe Sound D...

During two-channel stereo recording, two microphones are placed in strategically chosen locations relative to the sound source, with both recording simultaneously. The two recorded channels will be similar, but each will have distinct time-of-arrival and sound-pressure-level information. During playback, the listener's brain uses those subtle differences in timing and sound level to triangulate the positions of the recorded objects. Since each microphone records each wavefront at a slightly different time, the wavefronts are out of phase; as a result, constructive and destructive interference can occur if both tracks are played back on the same speaker. This phenomenon is known as phase cancellation. Coincident-pair microphone arrangements produce stereo recordings with minimal phase difference between channels.[3]

Reason RE Lab One Recordings Battle-Axe Sound D...

Download File: https://www.google.com/url?q=https%3A%2F%2Ftweeat.com%2F2uduuk&sa=D&sntz=1&usg=AOvVaw3LNpsLGc2Q9KcNMq5aDBmu

In the United States, Harvey Fletcher of Bell Laboratories was also investigating techniques for stereophonic recording and reproduction. One of the techniques investigated was the wall of sound, which used an enormous array of microphones hung in a line across the front of an orchestra. Up to 80 microphones were used, and each fed a corresponding loudspeaker, placed in an identical position, in a separate listening room. Several stereophonic test recordings, using two microphones connected to two styli cutting two separate grooves on the same wax disc, were made with Leopold Stokowski and the Philadelphia Orchestra at Philadelphia's Academy of Music in March 1932. The first (made on March 12, 1932), of Scriabin's Prometheus: Poem of Fire, is the earliest known surviving intentional stereo recording.[10] The performance was part of an all-Russian program including Mussorgsky's Pictures at an Exhibition in the Ravel orchestration, excerpts of which were also recorded in stereo.[11]

Utilizing selections recorded by the Philadelphia Orchestra, under the direction of Leopold Stokowski, intended for but not used in Walt Disney's Fantasia, the Carnegie Hall demonstration by Bell Laboratories on April 9 and 10, 1940, used three huge speaker systems. Synchronization was achieved by making the recordings in the form of three motion picture soundtracks recorded on a single piece of film with a fourth track being used to regulate volume expansion. This was necessary due to the limitations of dynamic range on optical motion picture film of the period, however, the volume compression and expansion were not fully automatic, but were designed to allow manual studio enhancement; i.e., the artistic adjustment of overall volume and the relative volume of each track in relation to the others. Stokowski, who was always interested in sound reproduction technology personally participated in the enhancement of the sound at the demonstration.

In the early 1940s, composer-conductor Alfred Newman directed the construction of a sound stage equipped for multichannel recording for 20th Century Fox studios. Several soundtracks from this era still exist in their multichannel elements, some of which have been released on DVD, including How Green Was My Valley, Anna and the King of Siam, The Day the Earth Stood Still and Sun Valley Serenade which, along with Orchestra Wives, feature the only stereophonic recordings of the Glenn Miller Orchestra as it was during its heyday of the Swing Era.

Each groove needed its own monophonic needle and cartridge on its own branch of the tonearm, and each needle was connected to a separate amplifier and speaker. This setup was intended to give a demonstration at a New York audio fair of Cook's cutter heads rather than to sell the record; but soon afterward, the demand for such recordings and the equipment to play them grew, and Cook Records began to produce such records commercially. Cook recorded a vast array of sounds, ranging from railroad sounds to thunderstorms.[note 1] By 1953, Cook had a catalog of about 25 stereo records for sale to audiophiles.[29]

1952 saw a renewed interest in the United States in stereo broadcasting, still using two stations for the two channels, in part in reaction to the development of two-channel tape recordings. The Federal Communications Commission's (FCC) "duopoly" rule limited station owners to one AM station per market. But many station owners now had access to a co-owned FM station, and most of these tests paired AM and FM stations. On May 18 KOMO and KOMO-FM in Seattle, Washington conducted an experimental broadcast,[51] and four days later Chicago AM radio station WGN and its sister FM station, WGNB, collaborated on an hourlong stereophonic demonstration.[52] On October 23, 1952 two Washington, D.C. FM stations, WGMS-FM and WASH, conducted their own demonstration.[53] Later that month New York City's WQXR, paired with WQXR-FM, initiated its first stereophonic broadcast, which was relayed to WDRC (Franklin Doolittle's former WPAJ, now located in Hartford, Connecticut) and WDRC-FM.[54][55] By 1954, WQXR was broadcasting all of its live musical programs in stereophonic sound, using its AM and FM stations for the two audio channels.[56] Rensselaer Polytechnic Institute began a weekly series of live stereophonic broadcasts in November 1952 using two AM stations, WHAZ in conjunction with a very low powered local carrier current station, which meant the stereo listening area did not extend beyond the college campus.[57]

Here, two directional microphones are at the same place, typically pointing at an angle between 90 and 135 to each other.[72] The stereo effect is achieved through differences in sound pressure level between two microphones. A difference in levels of 18 dB (16 to 20 dB) is needed for hearing the direction of a loudspeaker. Due to the lack of differences in time-of-arrival/phase ambiguities, the sonic characteristic of X-Y recordings has less sense of space and depth when compared to recordings employing an A-B setup. When two figure-eight microphones are used, facing 45 with respect to the sound source, the X-Y setup is called a Blumlein Pair. The sonic image produced is realistic.

Descriptions of stereophonic sound tend to stress the ability to localize the position of each instrument in space, but this would only be true in a carefully engineered and installed system, where speaker placement and room acoustics are taken into account. In reality, many playback systems, such as all-in-one boombox units and the like, are incapable of recreating a realistic stereo image. Originally, in the late 1950s and 1960s, stereophonic sound was marketed as seeming "richer" or "fuller-sounding" than monophonic sound, but these sorts of claims were and are highly subjective, and again, dependent on the equipment used to reproduce the sound. In fact, poorly recorded or reproduced stereophonic sound can sound far worse than well done monophonic sound. Nevertheless, many record companies released stereo "demonstration" records to help promote stereo. These records often included instructions for setting up a stereo system, 'balancing' the speakers, and a variety of ambient recordings to show off the stereo effect.[80] When playing back stereo recordings, the best results are obtained by using two identical speakers, in front of and equidistant from the listener, with the listener located on a center line between the two speakers. In effect, an equilateral triangle is formed, with the angle between the two speakers around 60 degrees as seen from the listener's point of view. Many higher quality multichannel (two-channel and beyond) speaker systems, then and now, include detailed instructions specifying the ideal angles and distances between the speakers and the listening position to maximize the effect based on, often extensive, testing of the particular system's design.

In the 1960s, it was common practice to generate stereo versions of music from monophonic master tapes, which were normally marked "electronically reprocessed" or "electronically enhanced" stereo on track listings. These were generated by a variety of processing techniques to try to separate out various elements; this left noticeable and unsatisfactory artifacts in the sound, typically sounding "phasey". However, as multichannel recording became increasingly available, it has become progressively easier to master or remaster more plausible stereo recordings out of the archived multitrack master tapes. 041b061a72